After the Sonoff Basic and the Sonoff 4CH Pro, we’re now flashing the MagicHome RGB LED Controller to install the ESPHome firmware on it. With this device, we can control the color, the intensity and the effects applied to the LED strip. So here are the details to have it […]
Continue Readinghttps://www.youtube.com/watch?v=_lldSKzded0 In this tutorial, we’ll see how to flash a Sonoff 4ch Pro R2 to install the ESPHome firmware. This IOT device has a lot of hardware : 4 switches, 4 Relays, 1 LED and 3 GPIO available for sensors ! And, as always, adding it to Home Assistant is […]
Continue Reading
As discussed in Controlling LED Strips – The easy way (Part 1), I need to control at least 7 different RGB LED Strips with an Arduino. Options with PWM or pre-built WiFi modules were a bit to long / costly. So why don’t we use the IR modules that comes with […]
Continue Reading Over the years I bought a lot of LED strips to add almost everywhere … But since I didn’t want to have 44-keys remotes at each corners of my house and that I also want to have them available on power outage, I came up with a different plan to […]
Continue Reading
