Close
Get started with ESPHome Add-On on Home Assistant

Get started with ESPHome Add-On on Home Assistant

There is multiple ways to configure your ESPHome nodes and to update them. From the command line, Tasmotizer and the other options, the most user-friendly is certainly the ESPHome Add-On (At least if you’re using Home Assistant). So here is how to get started with ESPHome Add-On. Installation Since few versions, ESPHome is now in…

How to control WS2812B LED strip with a Sonoff Basic and ESPHome

How to control WS2812B LED strip with a Sonoff Basic and ESPHome

https://youtu.be/LpCT-QozMWU In this project, we’ll see how to control WS2812B LED strip with a Sonoff Basic using ESPHome. Once configured, it can be controlled and automated with Home Assistant. If you like this project, please don’t forget to Like and Subscribe ! Here are the other episode of the series :– Episode 1 : How…

How to install ESPHome on MagicHome LED Controller

How to install ESPHome on MagicHome LED Controller

After the Sonoff Basic and the Sonoff 4CH Pro, we’re now flashing the MagicHome RGB LED Controller to install the ESPHome firmware on it. With this device, we can control the color, the intensity and the effects applied to the LED strip. So here are the details to have it available on Home Assistant. What…

How to install ESPHome on a Sonoff Basic

How to install ESPHome on a Sonoff Basic

https://youtu.be/4Q3whVVVwYw ESPHome is a great way to start DIY IOT. Thus, it can also be installed on existing devices like smart lights, plugs, power strip and more. In this tutorial, we’ll see how to use, configure and install ESPHome on a Sonoff Basic. What is ESPHome ? ESPHome is an ecosystem which allows to control…

How to use distance sensor HC-SR04 with the Arduino

How to use distance sensor HC-SR04 with the Arduino

https://www.youtube.com/watch?v=MKcqQhdHCWw In this tutorial, we’ll see how to connect sensor HC-SR04 with an Arduino. As a test project with this sensor, we’ll create a small parking assistant which will display if a car is too near, too far or in the expected distance range. Please don’t forget to like, share and subscribe ! Material Description Quantity…

How to control RGB LED matrix with an Arduino

How to control RGB LED matrix with an Arduino

https://www.youtube.com/watch?v=VtIWN5SJDYo In this tutorial, you’ll see how to display text on a 32×8 RGB LED Matrix (built with WS2812B) within few minutes. This will let you control an RGB LED matrix with an Arduino. If you build something with a similar setup, please comment and share your projects ! Please don’t forget to subscribe to…